One we did earlier

On a "one before the show" system for today. The smaller molding is pretty much as it was yesterday here with routing and evidence of rebating, but with a bit of material taken off and with the "save till last" fin removed. The other has been worked over with the sander having been in a similar state.
In the lower picture the smaller molding moves into the lead with the sanding etc done and the bits that show scorched and polished a little. The door lintle is the bit in the vice, the smaller molding will be glued on there tomorrow as all the interior facing can go on from the start.
The bits with holes in here will be the corner pieces I spoke about the other day kneeling at the router.
So that's that for today.